|
Industrial Process Controllers & Monitors
 alpha-COND 200 1/8 DIN Conductivity Controllers
-
User-Customisation through Scrolling Menu, 14-Segment LED - intuitive user interface guides user easily through setup functions
-
Multi Measurement Range- User Selectable
-
Galvanically Isolated 4-20 mA Output for remote monitoring or hardcopy recording
-
Universal Power Supply Input from 85 to 250 VAC/DC allows use at multiple sites and withstands voltage fluctuations
-
Two Level Password Protection prevents un authorized tampering with settings
-
Automatic Temperature Compensation with 3-wire Pt 100 system ensures accurate readings under fluctuating temperatures
-
Adjustable Temperature Coefficient (0.0 to 5.0%/oC) and selectable cell constants for more accurate measurements
-
Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point
-
Non-Volatile Memory retains all stored parameters and calibration data even if power fails
-
Easy Installation and Wiring with detachable plug-in connectors
Applications:
CON 200: Use for plating tank, rinse water, boiler and cooling tower, feed water and blowdown control, font solution make-up and control for printing, photographic developing, chemical production process, ion exchange systems, R.O. systems, industrial process water, wastewater, dilute acids, salts and bases.
Specifications:
|
Product Specification
|
Description
|
|
Conductivity Range
|
0.00 – 20.00 µS/cm
0.0 – 200.0 µS/cm
0.0 – 200.0 µS/cm
0 – 2000 µS/cm
0.00 – 10.00 mS/cm
0.00 – 20.00 mS/cm
0.0 to 200.0 mS/cm
0.0 – 200.0 mS/cm
|
0.1 µS/cm
0.1 µS/cm
1 µS/cm
1 µS/cm
1 mS/cm
1 mS/cm
1 mS/cm
10 mS/cm
|
|
Accuracy
|
± 1% of full scale
|
|
Temperature Range
|
-10 to 110 °C
|
|
Resolution & Relative Accuracy
|
0.1 °C & ±0.5 °C
|
|
Temperature Sensor
|
Pt 100 (3-wire)
|
|
Temperature Compensation
|
Auto / Manual (0°C to 100°C)
|
|
Temperature
Coefficient
|
0.0 to 5.0 %
|
|
Set Point
and Controller Functions
|
|
Function
|
Limit Control
|
|
Switching Hysteresis
|
10% of full scale
|
|
Contact Outputs, Controller
|
2 SPDT relays
|
|
Switching Voltage/ Current/ Power
|
Max 250 VAC/ Max 3A/ Max 600 VA
|
|
Electrical
Data and Connections
|
|
Power Requirement
|
85 to 260 VAC, 50/60 Hz or DC
|
|
Signal Output/ Load
|
4-20mA galvanically isolated /
200Ω
|
|
Connection Terminals
|
3 detachable connectors (3-pin;
7-pin & 9-pin terminal blocks)
|
|
Main Fuse
|
250mA, Anti-surge (BUSSMAN S504
+ 250mA)
|
|
Environmental
Conditions
|
|
Maximum Relative Humidity
|
10 to 95% (Non-condensing)
|
|
Ambient Temp. Operating Range
|
-10 to 50 °C (14 °F to 122°F)
|
|
Mechanical
Specifications
|
|
Dimensions
|
96 x 48 x 150 mm
|
|
Weights
|
300 g (boxed)
|
|
